In industrial production and warehousing logistics environments, industrial doors are used frequently. Correct maintenance can not only extend the service life of the door but also protect production safety and work efficiency. This article will detail the maintenance of industrial doors, providing maintenance advice for different types of industrial doors.
The importance of industrial door maintenance
After running for a long time, industrial doors may have problems such as worn parts and unsmooth switching. If regular maintenance is not carried out, it will not only affect productivity but also may bring potential safety hazards. Therefore, a scientific maintenance program is crucial, mainly including lubrication and maintenance, cleaning and maintenance, fault checking, and, so on.
Maintenance methods for different types of industrial doors
High-speed rolling door maintenance methods
Check the door curtain material: PVC door curtains or aluminum alloy door curtains should be cleaned regularly to prevent the accumulation of dust or oil stains affecting the beauty and sealing.
Lubricate the transmission system: use lubricant to maintain the motor chain, bearings and other parts to ensure that the high-speed door runs smoothly.
Safety device inspection: photoelectric sensing, safety bottom edge and other protection systems should be tested regularly to ensure that the door body will not cause accidents due to sensing malfunction.
Sectional door Maintenance Methods
Check the balance system: torsion spring or counterweight system is an important part of the sectional door, check whether it works properly every 6 months to prevent the door body from being out of balance resulting in unstable operation.
Track and pulley maintenance: keep the track clean and lubricate the pulley regularly to prevent the door from jamming or running poorly.
Electric control system checks: make sure the control panel, button switches, remote control devices, etc. work properly to avoid the door not being able to open or close due to electric control failure.
Industrial sliding door maintenance methods
Track cleaning and lubrication: The sliding tracks and rollers of a sliding door should be cleaned and lubricated regularly to prevent difficulty in moving the door due to friction.
Seal inspection: If the sliding door is used in a cold storage or clean room environment. The sealing of the seal is critical and the aging seal needs to be replaced regularly to maintain good isolation.
Door Appearance Maintenance: The metal door body should be regularly inspected for rust or peeling coatings. Timely paint touch-ups and rust-prevention treatments should be performed.
Daily maintenance recommendations for industrial doors
Regular cleaning: avoid dust, oil and dirt affecting the operation and sealing of the door.
Lubricate transmission parts: bearings, pulleys, chains and other parts need regular refueling and maintenance.
Check the electric control system: ensure that the motor, control panel and induction system operate normally.
Safety device testing: photoelectric sensing, infrared sensor, safety bottom edge and other devices need to be tested regularly to ensure safety.
Replacement of wear parts: such as seals, torsion springs, pulleys and other wear parts need to be replaced in time to prevent the expansion of the failure.