An electric vertical quick sectional door is suitable for a factory, warehouse, or workshop where the space above the plant is higher than the height of the door opening. The vertical sliding door runs vertically upward and downward along the guide rails on both sides to realize a door opening and closing all the way. According to the different spaces above the doorway, there are two other types of turn and inclined lifting.
The door plate of the electric fast-lifting door adopts a double-sided 0.5mm thick Baosteel color-coated steel plate. The front and back of the bar-shaped pressure rib strengthen the strength of the door plate, with a thickness of 40-50mm, two kinds. Between the steel plate filled with rigid polyurethane foam, a density of about 48kg / cubic. The bottom of the electric sliding door is equipped with an EPDM rubber sealing strip. The sealing strip is equipped with airbags above and on both sides of the aluminum profile + sealing rubber strips, which can ensure complete sealing and good heat insulation.
On the door panel of large vertical fast lifting door, a reinforcement bar of 8 centimeters high is set on the inner side of each door panel to ensure that the door panel has a wind strength of more than twelve grades.
The life span of the torsion spring determines the life span of the electric sliding door. The torsion spring of SEPPES electric vertical quick lift door is carefully calculated and then configured according to the size and weight of the door body, with a life span of 100,000 cycles. The material is 60Si2MnA alloy steel, the surface is oxidized, and the service life is more than 100,000 cycles.
The basic parameters of electric vertical quick sectional door
Control system: It is composed of Esaote motor, transmission shaft, balance system, wire rope, wire rope wheel and other parts.
Door body system: composed of door plate, auxiliary rail, straight rail, curved rail, small window, small door, hardware accessories and other parts.
Operating system: composed of control box, button, remote control and other parts.
Safety system: it is composed of a wire rope anti-break device and a torsion spring anti-break device. Bottom side airbag, top buffer device, and other parts.
SEPPES is a professional manufacturer of vertical quick sectional doors
SEPPES electric sliding door all series of industrial products through the EN, ISO90 01, CE report. Test report, water tightness report, industrial door to obtain torsion springs, motors, door panels of each accessory are certified qualification.
Suppose you happen to want to choose a factory to cooperate with. You can rest assured that the choice of SEPPES, our rigid fast door body frame, uses laser one-piece molding cutting. Both the compartment and the track are one, and the door body surface uses an imported plastic powder coating treatment. Tracks and compartments are installed before leaving the car. On the one hand, it avoids extrusion and deforma,tionan during transportation. On the other hand, this structure is more stable in the use of the process of longer life.